
For shell dice · 9 cavities
$89.99
3 available
Loading purchase options…
Make your own sharp-edged resin dice with this handmade platinum silicone dice mold. Nine cavities include a standard seven-dice set plus two additional D4 styles. The platform design leaves only the top face to sand and polish. WHAT'S INCLUDED - Numbered nine-dice mold with matching lid in your selected number style - D4 (caltrop), D4 (crystal), D4 (teardrop), D6, D8, D10, D%, D12, and D20 cavities - Dice and masters are not included and are shown for illustration only FEATURES - Lid design shows number style of dice produced with mold in colored silicone - flexes with the lid - Dice are platformed - only one face to sand and polish! - Includes three styles of D4 - caltrop, crystal, and teardrop - Platinum silicone, shore hardness 25A - 30A - Masters polished up to 1 micron abrasives to maximize gloss finish - All fonts used have commercial free use licenses - no issues with selling dice made from these molds! - Cast at 60 PSI - not recommended to do dice above 50 PSI MADE IN-HOUSE Our masters are designed, printed, and polished in-house. These are the same style of molds we use to make the dice sold in our shop. The mold design has been developed through testing and refinement, with firm platinum silicone and cast keys instead of cut keys. No petroleum jelly is used during mold creation. CASTING AND FINISHING These are FIRM molds and will take some effort to remove finished dice. This also increases the longevity of the molds compared to softer silicone. A small raised face (0.2-0.3mm) is normal on the top face - squeeze out excess resin from the middle after pouring and before curing to minimize. All other faces will be final finish quality and should not require finishing. Numbers are over 0.75mm deep so sanding down top face will not remove number if excess resin is squeezed out and raised faces are minimized. When using a pressure pot, we recommend filling unused D4 cavities with excess resin to avoid deformation of other dice. MATCHING BLANK INSERT MOLDS Matching blank molds are available separately for making shell dice. Buy a numbered mold and a blank mold together and get 10% off both when added to your cart: https://iceshadowproductions.etsy.com/listing/1855782713/blank-platinum-silicone-9-dice-sharp DICE SIZES D4 (caltrop/standard) - 18mm overall height, 22.05mm edges D4 (crystal) - 26.4mm overall height, 11mm wide faces, 15.4mm high faces D4 (teardrop) - 34mm overall height, 14.88mm wide faces D6 - 16mm wide faces D8 - 26.87mm overall height (point to point), 19mm width, 19mm wide faces D10 / D100 - 23.33mm overall height (tall points to tall points), 23.33mm overall diameter D12 - 22.65 mm overall height (point to point), 18mm face-to-face D20 - 24.50mm overall height (point to point), 19.47mm face-to-face MOLD WEAR AND CARE Silicone molds are consumable items and will break down with time. Small tears do not render the mold unusable, but will require some cleanup when casting. Small tears around the D20 may also happen when the masters are removed, but flashing will sand away with the top face finishing. No returns/exchanges once the mold is used, but if you have an issue with your order, please contact me so I can assist!
Read customer reviews on Etsy.
International shipping rates are shown at checkout for supported destinations. See the product details for processing times.
Free standard shipping within the United States.
Processing before shipment: 1–3 business days.
USPS Ground Advantage: estimated 2–5 business days in transit after shipment within the contiguous United States. Alaska, Hawaii, and offshore destinations may take longer. Delivery estimates are not guaranteed. International shipping rates are shown at checkout for supported destinations.
Returns accepted within 14 days of delivery. Exchanges accepted. Return by mail; buyers are responsible for return shipping costs.
Policies for Etsy orders ↗